Audio Menu; Management Menu - Dell 3400MP Manual Del Propietário

Audio Menu

Management Menu

P S —Select Yes to set the power saving delay period. The delay period is
OWER AVING
the amount of time you want the projector to wait without signal input. After that
set time, the projector enters power saving mode and turns off the lamp. The
projector turns back on when it detects an input signal or you press the power
button. After two hours, the projector turns off and you need to press the power
button to turn the projector on.
Select On (the default) to autodetect the available input
A S —
UTO OURCE
signals. When the projector is on and you press SOURCE, it automatically
finds the next available input signal. Select Off to lock the current input
signal. When Off is selected and you press SOURCE, you select which
input signal you want to use.
20 Using Your Projector
V —Press
OLUME
and to increase the volume.
M —Allow to mute the volume.
UTE
M L —Select the location of the
ENU OCATION
OSD on the screen.
P M —Select how the image
ROJECTION ODE
appears:
• Front Projection-Desktop (the default).
• Rear Projection-Desktop — The
projector reverses the image so you can project
from behind a translucent screen.
S T —Manually select signal type RGB,
IGNAL YPE
YCbCr, YPbPr.
L H —Display the operating hours since
AMP OUR
the lamp timer reset.
L R —After you install a new lamp,
AMP ESET
select Yes to reset the lamp timer.
to decrease the volume