Automatic Power Saving Function; Basic Operation - Onkyo DAC-HA300 Manual De Instrucciones

Automatic power saving function

This unit will enter sleep mode automatically under the following
circumstances.
When used as a headphone amp
o When 30 minutes pass without digital or analog audio input.
NOTE
Automatic power saving will not function when an iPod/iPhone/iPad (pow-
ered on) is connected to the iPod/iPhone/iPad device connection port or
a computer (powered on) is connected to the computer connection port.
During SD card playback
o When the player's auto power saving function is on and the player has
not operated for the set amount of time.
NOTE
To end sleep mode, turn the volume knob counterclockwise until the unit
is turned off.

Basic operation

V Complete all other connections before turning the unit on.
o Read the owner's manuals of all devices that will be connected, and
follow their instructions.
o Do not bundle connection cables with the power cord. Doing so
could cause noise.
o Connect all plugs securely.
Playback on an external input device
1
Connect the input source.
2
Turn this unit on.
Set the volume at a low level.
3
Wait until the input source has been selected.
4
Start playback on the input source device.
5
Turn this unit's power/volume knob to adjust
the volume.
Playback of audio files on an SD card
1
Insert the SD card.
2
Turn this unit on.
Set the volume at a low level.
3
Use the multiway (
file for playback on the MUSIC screen.
4
Press the multiway button to start playback.
5
Turn this unit's power/volume knob to adjust
the volume.
/ ) button to select a
11
EN