Network Cameras List; Software Update - Panasonic Viera TC-L42D30X Manual Del Operador

Network link
■
Edit the name of this TV
Sets your favorite name for this TV. This name
will be used to display the name of this TV on
the screen of the other Network compatible
equipment.
Select "VIERA network name"
Menu
Network link
VIERA network name
DLNA remote control
DLNA remote volume control
Network remote control
Edit the name and press OK
Entering character (p. 19)

Network cameras list

Before using a Network camera, you need to register the camera as shown below. You can also set
Default camera or Disconnect/Delete the registered cameras.
Press "Network cameras list" and
display screen
Set Network camera setting
Network cameras list
Camera name Model
Camera 1 BL-C210A
... ...
... ...
... ...
... ...
... ...
... ...
... ...
Select OK
RETURN
Find cameras
Disconnect
●
For this operation, please refer to the operating
manual for the Network camera.

Software update

Select "Software update"
Menu
Network settings
Connection test
Network connection
Wireless network
IP address/DNS settings
Network cameras list
Software update
Mac address
38
VIERA
Enable
Enable
Enable
Status Default
Connected
...
...
...
...
...
...
...
Delete
Default camera
Wireless (WiFi)
00-0b-97-7c-65-e9
■
Switches DLNA remote control (Disable/Enable)
Switches DLNA remote control "Disable" or "Enable"
DLNA remote control
select ■
Volume setting in DMR operation (Disable/Enable)
Sets volume setting in DMR operation
OK • Available only when "Enable" is selected in "DLNA remote
control"
DLNA remote volume control
■
Switches Network remote control (Disable/Enable)
Switches remote control of network device such as a
smartphone to "Disable" or "Enable".
Network remote control
Start camera search.
●
Before you start to search for a camera, switch the
camera to registration mode.
●
Search condition also depends on "Network settings"
select
Delete camera information.
Disconnect to camera.
"Disconnected" will be displayed in "Status".
Set to default use.
Displayed "(Default)" next to camera name.
(Available only when reconnecting)
Connect to Camera. "Connect" will be displayed in
"Status".
Press OK to start the Software update screen
Follow directions on the screen
select
●
Set "Clock" first. (p. 15)
OK
Enable
select
Enable
select
Enable
select