Setup - Panasonic Viera TC-L42D30X Manual Del Operador

Setup

Settings Items
Channel surf All/Favorite/
mode Digital only/
Analog only
Language English/
Español/
Français
Clock
ANT/Cable setup See p. 42-43 for more detail.
Input labels Selects the terminal and label of the external equipment.
(Display labels Devices connected to external input terminals can be labeled for easier identification during the
of connected input selection. (Input select (p. 21))
devices) Terminals: HDMI 1-4/Component/Video/PC
Label: [BLANK] Blu-ray/CABLE/SATELLITE/DVD/DVD REC/DVR/GAME/HOME THTR/
RECEIVER/COMPUTER/MEDIA CTR/MEDIA EXT/VCR/CAMERA/MONITOR/AUX/OTHER/
Not used
• You can also enter the label name directly. (Entering characters (p. 19))
Network settings See p. 36-38 for more detail.
VIERA Link settings See p. 30-31 for more detail.
ECO/energy Power save
saving (Standard/
Saving)
No signal for 10
minutes
(Stay on/ Power
TV off)
No activity for 3
hours
(Stay on/ Power
TV off)
Keyboard type
Advanced setup Auto power on
(No/Yes)
Image viewer
auto play
VIERA Connect
Banner
(On/Off)
First time setup
About
Reset to defaults
Other function settings
Item Description
Sets the mode to select the channel with the Channel up/down button.
Favorite: Only channels registered as FAVORITE. (p. 18)
Selects the screen menu language.
Adjusts the clock. (p. 15)
Reduces screen brightness to lower power consumption. Eye-friendly for
viewing in a dark room.
To conserve energy, the TV automatically turns off when NO SIGNAL and NO
OPERATION continue for more than 10 minutes.
• Not in use when "Auto power on" is set to "Yes", or "On/Off Timer" is set.
• "No signal for 10 minutes was activated" will be displayed for about 10 seconds
when the TV is turned on for the first time after the power was turned off by "No
signal for 10 minutes".
• The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining
minutes prior to the shut-off.
To conserve energy, the TV automatically turns off when no operation of remote and
side panel key continues for more than 3 hours.
• Not in use when "Auto power on" is set to "Yes", or "On/Off Timer" is set, or while
"PC input" is selected.
• "No activity for 3 hours was activated" will be displayed for about 10 seconds when
the TV is turned on for the first time after the power was turned off by "No activity
for 3 hours".
• The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining
minutes prior to the shut-off.
Select keyboard type. Operate USB keyboard (p. 19)
(U.S./Canadian French/Canadian Multilingual Standard/Spanish (Latin
America)/Spanish (Spain))
Turns TV On automatically when the cable box or connected device is turned On.
TV AC cord must be plugged into this device. TV turns on every time the power is restored.
Slideshow/
Photos/Videos/
Music/Set later/
Off
Sets the banner display status.
Restarts the first time setup from "Language" setting. (p. 12)
Displays TV version and software license.
Performing Reset will clear all settings made with Setup, such as channel
settings.
• Password setting/entering (p. 19)
Sets the media contents or playback type to play back SD
cards automatically.
Set later: "Image viewer settings" menu will be displayed repeatedly.
"Using Media player" (p. 22)
49