Ambient Temperature; Displaying Stored Measurements - Beurer FT 58 Instrucciones De Uso

4. Hold the sensor tip of the ear thermometer 0.4-0.8 inch (1 – 2 cm) from the surface to be measured
and press the START Button.
5. After one second, the thermometer will beep once and display the measure-
ment. Press the ON/OFF button to shut the thermometer off.

Ambient temperature:

When the thermometer powers on, the ambient temperature, date, and time will alternate on the LCD
Display.

Displaying stored measurements:

The ear thermometer stores the last 10 ear and surface temperatures, along with the measurement date and
time. To recall stored measurements, proceed as follows:
1. Press the ON/OFF button to switch the thermometer on.
2. Press and hold the ON/OFF button for three seconds;
"MEM" and the last stored measurement will appear on
the LCD Display.
8