Pre-Set Filter Cycles - fluidra ASTRALPOOL Compact kit Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 29
HOW TO USE YOUR SPA
Jets 1 / Jets 2 (*) / Blower (*)
(*) Available in some designs only
Press the pump button to activate or deactivate it. The pump will deactivate after 15 minutes.
Light/Chromotherapy/Environmental Lighting System
Press the "Light" button to switch on the spa lighting. It will automatically switch off after 4
hours.
In designs with chromotherapy lighting or with an environmental lighting system, the sequence
and colour of the spotlight/s can be changed by pressing the "Light" button in quick succession.
Mode / Prog
The operating modes can be changed by pressing the "Warm" or "Cool" button and then "Mode/
Prog".
• The standard mode will keep the spa at its programmed temperature. "Std" will appear on the
screen for a few seconds when the standard mode has been selected.
• The economy mode only heats the spa to the programmed temperature during filter cycles.
"Ecn" will appear on the screen when the temperature of the water is not the current temperature
and it will alternate with the temperature of the water when the pump is working.
• The sleep mode only heats the spa up to 20°F (10°C) below the programmed temperature
during filter cycles. "Slp" will appear on the screen when the temperature of the water is not the
current temperature and it will alternate with the temperature of the water when the pump is
working.

5.4. PRE-SET FILTER CYCLES

The filter cycle can be programmed for 2 ("FIL2"), 4 ("FIL4"), 6 ("FIL6") or 8 hours ("FIL8"),
or for a continuous filter cycle ("FILC"). The pre-set filter time is 2 hours.
To programme the cycle, press "Warm" or "Cool" and then press "Jets 1". Press either the
"Warm" or "Cool" button to reset a programme.
Press "Jets 1" to exit the programming system.
The first filter cycle starts 6 minutes after the spa has been activated. The second filter cycle
starts 12 hours later.
If you want the filter cycle to start at a set time, disconnect the spa from the mains supply and
reconnect it at the desired time.
ENG
21

Publicidad

Tabla de contenido
loading

Tabla de contenido