Drawer Removal; Care And Cleaning; Utility Sink; Cabinet - Transform QL652 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Maintenance (continued)
DRAWER REMOVAL AND REPLACEMENT
To remove the drawer, pull it out to its fullest extension . On each of the drawer
slides there is a black lever . Push the lever on the left slide up and the lever on
the right slide down . The drawer should now slide away from the cabinet .
Reverse this procedure to replace the drawer .

Care and Cleaning

UTILITY SINK

Do
-
Use common household cleaners (non-abrasive) or a mild liquid dish
washing detergent . Rinse well and dry with a clean cloth .
-
Remove dust and dry dirt with a soft, damp cloth .
-
Clean grease, oil, paint and ink stains with isopropyl (rubbing
alcohol) . Immediately rinse with water after removal of stain .
Do not
-
Do not allow your acrylic surface to come into contact with products
such as acetone (nail polish remover), nail polish, dry cleaning
solution, lacquer thinners, gasoline, pine oil, etc .
-
Use caution when using sharp instruments that may fall and scratch
.
the surface
This utility sink is manufactured with premium acrylic . With the proper care and maintenance it will provide you with many years
of enjoyment .
SCRATCH, SPOT, AND BLEMISH REMOVAL AND SURFACE RESTORATION:
Little rust spots and blemishes that periodically appear in the sink are typically the result of the steel interacting with the chemicals
found in the vast spectrum of substances that sinks are commonly exposed to . They may also get transferred from other objects
placed or left in the sink . Scratches are the result of regular wear and tear .
To remove scratches, spots, and blemishes from the sink, rub them with a non-metallic scouring pad (e .g . Scotch-Brite
with a mild abrasive cleaner (e .g . Barkeeper's Friend
finished, rinse the sink with water and dry it with a towel to allow the sink to form a protective outer layer. This procedure can also be
used to renew all of the surfaces of the sink .

CABINET

Do
-
Remove dust and dry dirt with a soft, damp cloth .
-
Clean grease, oil, paint and ink stains with isopropyl (rubbing
alcohol) . Immediately rinse with water after stain removal .
Do not
-
Do not allow your cabinet surface to come into contact with products
such as acetone (nail polish remover), nail polish, dry cleaning
solution, lacquer thinners, gasoline, pine oil, etc .
-
Use caution when using sharp instruments that may fall and scratch
the surface .
®
) . Always rub the surfaces in the direction of the grain of the steel . When
11
Please contact cs@conglomkb.com or 1-888-449-9197 for further assistance .
Right drawer slide
Black lever
Left drawer slide
Black lever
®
) combined
CONGLOMKB .COM

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido