Maintenance And Service; Accessories, Tools; Environment - Festool HL 850 E Manual De Instrucciones

Always disconnect the mains plug
from the socket before carrying out any maintenance
work on the machine.
Any maintenance and repair work
requiring an opening of the motor housing may only
be carried out by an authorised customer service
workshop.
If the power cord is damaged, the cord must be re-
placed at manufacturer or service workshops.
The planer plate is made of a high-quality mag-
nesium alu minium alloy. Any corrosion which may
occur can be removed by buffing using a fine elastic
fibre mat „V lies quality" (grit S800). To prevent cor-
rosion of the chromated planer head any cleansant
used must have a pH value of between 4.5 and 8.
Keep the ventilation slots in the motor housing clean
and free of obstructions at all times to ensure an
adequate circulation of air.
The planer is fitted with special motor brushes with
an automatic cut-out. When the brushes become
worn the power supply is shut off automatically and
the planer comes to a standstill.
For safety reasons, only use origi-
nal Festool accessories and tools!
Three rustic planer heads are also available as ac-
cessories. The planer head HK 82 RG provides a
coarse rustic texture and the HK 82 RF a fine rustic
texture. The planer head HK 82 RW provides an ir-
Do not dispose of the device as domestic waste!
Dispose of machines, accessories and packaging at
an environmentally responsible recycling centre.
Observe the respective national regulations.

Maintenance and service

To clean the chip collection opening:
– Remove the adapter AD-HL (5-6) (if applicable).
– Empty the adapter AD-HL, remove any obstruc-
tions.
– Remove any chips jammed into the chip collection
opening, if necessary clean the machine with a
resin solvent.
– In case of extreme contamination, remove the
planer head (chapter 5.2) to clean the opening
leading to the chip ejection.
– Attach the dust extractor and vacuum the chip
ejection openings.
EKAT
1

Accessories, tools

regular undulated surface. All rustic planer heads
can only be fitted with the HSS spiral cutters provided
for this purpose. No interchange is possible.
The accessory and tool order number can be found
in your Festool catalogue or on the Internet under
www.festoolusa.com.

Environment

Customer service and repair only
through manufacturer or service
workshops: Please find the nearest
address at: www.festoolusa.com/
service
Use only original Festool spare parts!
4
Order No. at: www.festoolusa.com/service
5
3
2
11