First Use - STERWINS 40VBC2-33.1 Instrucciones De Montaje

3. Attach the upper and lower handles with the bolts by a hexagon wrench.
4. Adjust the handle to a position along the stem which is suitable for you to hold and guide the product.
5. Fix the handle by fi rmly tightening the bolts.
Install the harness : illustration 3.4
The harness with quick release function can be hooked behind the hand.
Use the harness at all times adjust both harness and harness clamp on the unit so that the unit hands a
few inches above ground level. Harness the unit on the right side of your body.
4.2.1 Assemble Grass Trimmer Head
Assemble the trimmer head shield : illustration 2.8
1. Install the cutting head shield on the neck of the head collar.
2. Tighten the two bolts securely to attach the shield by a cross wrench .
3. Install the trimmer head shield on the cutting shield.
4. Tighten the three bolts securely to attach the shield by a cross wrench .
Assemble the trimmer head : illustration 2.10
1. Insert a hexagon wrench into the locking hole until the head collar stops.
2. Screw the spool in place and turn clockwise until it cannot rotate any more with the locked hub.
4.2.2 Assemble Brush Cutter Head
Changing the trimmer head to the cutting blade : illustration 2.11 to 2.14
1. Rotate the head collar until the outer visible locking hole aligns with the inner locking hole beneath
the head collar.
2. Insert a hexagon wrench into the locking hole until it stops.
3. Turn the head counterclockwise to unscrew and remove the head from the arbor.
4. Unscrew the bolts of the trimmer head shield counterclockwise to remove the trimmer head shield.
5. Holding the wrench tight so the mounting disc does not move. Install the blade and fi x plate.
6. Screw down the locknut and tighten it clockwise by holding the socket spanner .
7. Remove the spanner and the wrench and check for freedom of motion of the blade.
8. To remove the blade, unscrew the locknut counterclockwise and remove the fi x plate ,blade.
Remove the line cutting blade cover
NOTE : It is recommended to cover the line blade when your
work is fi nished.
Remove this cover before you turn on the machine.

4.3 FIRST USE

Check the battery : illustration 3.2
WARNING ! Read the « SAFETY INSTRUCTION » section at the
beginning of this manual including all text under subheading
therein before using this product.
The battery is not fully charged at the time of purchase.
Before using the product for the fi rst time, place the battery
in the charger and charge it fully.
327
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
BR
EN