Operation - Kenwood KA-S10 Manual De Instrucciones

Operation

POWER
ON OFF
When CD is selected .
INPUT SELECTOR
AUX
CD
D.AUDIO
Decrease
volume
VOLUME
MIN MAX
Adjusting the bass tone with N.B. (Natural Bass) CIRCUIT knob
Turn the N.B. CIRCUIT knob in either direction to adjust the low frequencies if necessary.
N.B.CIRCUIT
OFF
In general, the bass adjustment using the N.B. circuit is
most effective when using compact speakers because
the bass is often insufficient with these kinds of
speakers. The N.B. CIRCUIT knob should be set to OFF
with a subwoofer.
1. Switching the power on (off).
Press the POWER switch to switch the unit ON.
One of the input indicators light up when the power is switched
ON.
To switch the unit OFF, press the POWER switch again. The input
indicators should turn off when the power is OFF.
2. Selecting the desired input sources.
Turn the INPUT SELECTOR knob in either direction to select the
source.
The input indicator for the selected input source lights up.
3. Adjusting volume.
Increase
Turn the VOLUME knob in either direction to adjust the volume.
volume
Turning the knob clockwise increases the listening volume and
turning the knob clockwise decreases it.
1 2
3
OFF : Normal playback (The N.B. circuit function is de-
activated.)
1 : Enhances the low frequencies around 60 Hz.
2 : Enhances the low frequencies around 70 Hz.
3 : Enhances the low frequencies around 100 Hz.
Image of enhancement effects of N.B. circuit
Level
Frequency
9
ENGLISH