STERWINS 8VGS2-3IN1.1 Instrucciones De Montaje página 260

NOTE : The safety lock-off button reduces the risk of accidental starting.
FR
To turn the tool OFF, release the ON/OFF trigger switch.
ES
NOTE : The steering tube has the same functions (steering tube's ON/OFF trigger switch and steering
tube's safety lock-off button ) to switch the tool on or off after assembling the steering tube.
PT
IT
Do not use your fi ngers to free up jammed blades. Jammed blades can
release suddenly causing serious injury. Never touch the blade rail while
EL
in operation and be aware of sharp edges even when the battery grass
shear is not in use.
PL
Always ensure you are securely balanced with a free work area before switching on the grass shear.
RU
Position button
There are three working positions to operate the grass shear after assembling the steering tube.
KZ
Push the position button of the steering tube to choose the best working position to operate the tool
working.
Operation safety warnings :
UA
• Check the product and charger as well as accessories for damage before each use. Do not
use the product if it is damaged or shows wear.
RO
• Double check that the accessories and attachments are properly fi xed.
EN
• Always hold the product on its handle. Keep the handle dry to ensure safe support.
• Ensure that the air vents are always unobstructed and clear. Clean them if necessary
with a soft brush. Blocked air vents may lead to overheating and damage the product.
• Switch the product off immediately if you are disturbed while working by other people
entering the working area. Always let the product come to complete stop before putting
it down.
• Do not overwork yourself. Take regular breaks to ensure you can concentrate on the
work and have full control over the product.
• Before switching the product on, check whether it has been assembled correctly and all
the moving parts are running smoothly.
• We recommend slightly dampening surfaces in dusty conditions or using a mister
attachment.
• Operate the product only at reasonable hours – not early in the morning or late at night
when people might be disturbed.
• Avoid using the product in bad weather conditions, especially when there is a risk of
lightning. Do not operate the product in poor lighting. The operator requires a clear view
of the work area to identify potential hazards.
CAUTION : Do not force the blades through dense growth. If
the blades slow down, then reduce your cutting pace. Should
the blades jam, release the trigger immediately.
260