- EN -
Daily plan with daylight and moonlight:
The daily plan is executed in a 24-h cycle
and is repeated automatically. The activa-
tion time determines the time at which it
is repeated.
"10 HR": 10 hour day (sunrise, daylight,
sunset) and 14 hour night (moonlight).
"12 HR": 12 hour day, 12 hour night.
REMEDY OF FAULTS
Malfunction
HighLine Premium LED cannot be
switched on
The remote control is not having
any effect.
18
MAINTENANCE AND CLEANING
Cleaning the device
How to proceed:
• Wipe the device with a damp cloth.
Changing the battery
How to proceed:
E
1. Open the battery compartment.
2. Pull the battery from its holder and replace it.
– Pay attention to the polarity of the batteries.
3. Push the battery holder into the remote control.
Cause
Incorrect connection
EAC transformer is not connected to
the mains
Light switched off via the remote
control
The remote control is not reaching
the sensor.
Too large a distance between the
remote control and the unit.
The remote control battery capacity
is exhausted.
Remedy
Check the connection
Connect to the mains
Switch on the light via the remote
control.
Point the remote control in the di-
rection of the sensor.
Reduce the distance.
Replace the battery.
IR Control Set