Initial Use; Installation Location; Unpacking And Assembly - Beurer MC2000 Instrucciones De Uso

5.

Initial use

Warning!
• Keep packaging material away from children!
Choking hazard.
• Before using the device for the first time, read the
'Safety notes' section.
Safety notes, pages 2 and 3
w

Installation location

• Install the Shiatsu office chair on a sturdy and even
surface.

Unpacking and assembly

The MC2000 Shiatsu office chair is delivered in a
cardboard box.
Assembly MC2000
w MC2000 assembly instructions
Caution!
• The Shiatsu office chair could damage your
flooring. Place a suitable, non-slip underlay under
the Shiatsu office chair.
Important!
Do not use sharp or pointed tools (e.g. a Stanley knife)
to remove the packaging.
Important!
Regularly check the screwed joints to ensure they are
correctly tightened. Tighten any loose screw joints.
Height adjustment
> Sit on the office chair
> Take your weight off the seat and pull the lever
> Set the office chair to the desired height by placing your weight on
it or taking your weight off it, as required
> Release the lever
The position is fixed.
Back rest adjustment
> Sit on the office chair
> Pull the lever on the left-hand side upwards
> Move back rest to the desired position
> Press lever downwards
The position is fixed.
Rocker function adjustment
> The rotary knob must be turned to the left or right until the rocker
resistance is set as desired.
16