Operation; Before Switching On; After The Massage - Beurer MC2000 Instrucciones De Uso

Silla de oficina con masaje shiatsu
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 29
6.

Operation

Warning!
Trip hazard! Danger of accidents!
Switch off the Shiatsu office chair immediately after finishing a massage, pull the mains plug out of the socket
and retract the cable.
Warning!
• Before using the device for the first time, read the
'Safety notes' section.
Safety notes, pages 2 and 3
w

Before switching on

• Wear comfortable clothes during the massage.
• Remove all objects from your trouser pockets (e.g.
keys, pocket knife, mobile phone).
• Assume a comfortable, relaxed position.
• Always sit in the middle of the seat so that your
backbone is positioned precisely between the
massage heads.
• The back cushion can be folded back during the
massage.
• The massage should feel pleasant and relaxing
at all times. If the massage is painful or
uncomfortable, stop the massage or change your
sitting position.
• If the device has not been used for a longer period
of time, check that the device is functioning
Starting the massage
> Pull out the required length of mains cable.
> Plug the mains plug into the socket.
> Start the massage using the on/off button
The LED button lights up.
> Press on the required massage area.
The LED button lights up.
The programme runs for 15 minutes and the massage
function then switches off.
Switching off the Shiatsu office chair
Once the massage programme is complete, the
massage function switches off automatically.
Following selection of a new massage area, the
massage runs for another 15 minutes.
Important!
Do not use the device for longer than 15 minutes at a
time otherwise the device could overheat. Allow the
device to cool for at least 30 minutes before using it
again.

After the massage

> Pull the mains plug out of the socket.
> Press the cable rewinder.
The cable will be wound back in.
Important!
• If you experience irritation of any kind, stop
treatment immediately.
correctly before use.
• Gently press your back against the back rest. Now
check whether the massage is comfortable.
• Press your weight harder against the back of the
chair if this still feels comfortable.
Please note: Following selection of a new massage
area, the massage runs for another 15 minutes.
.
Interrupting the programme
> Press the on/off button
The massage mechanism then returns to the start
position and switches off.
During the massage, you can switch off the device at
any time using the on/off button
17
.
.

Publicidad

Tabla de contenido
loading

Tabla de contenido