Fitting The Cuff - visomat comfort II Manual De Instrucciones

C

2. Fitting the cuff

Bare your left arm. Fit the cuff to your arm
placing its lower end 2 to 3 cm (about 1
inch) above the elbow and the pipe lying
in the middle of the crook of the arm.
Left-handed users can fit the cuff to their
right arm (observing the general sense of
instructions).
Tighten the cuff by pulling its free end and
placing it over the Velcro fastener. After
applying the cuff, you should be able to
insert two fingers between arm and cuff.
Insert the air plug of the cuff into the
display unit's air socket on the left.
Stretch out your arm on the table, with
the palm turned upwards. It is necessary
to keep it still during the measurement.
Do not talk.
GB-34
Display unit operation
Please check to ensure that the arrow on the cuff
is positioned in between the white marking on the
cuff edge. (circumference 22-31 cm).