Miscellaneous - Medisana MC 824 Instrucciones De Manejo

3 Operating / 4 Miscellaneous
GB
3.2
•
Operation
•
•
•
•

4 Miscellaneous

4.1 •
Cleaning
and
•
main-
tenance
•
18
The vibration massage in the upper thigh area can also be operated
separately by pressing vibration massage button
tor LED "1" next to the button lights up and both vibration massage
motors are switched on. They begin with a gentle massage. Press
button again and the vibration level increases (medium intensity
massage LED "2"). Press button a third time and the maximum vibra-
tion level (highest intensity massage, LED "3") is switched on. After
button is pressed a fourth time, the vibration massage is switched off
and LED "3" next to the button goes out.
The heat function can be activated at any time with the Shiatsu mas-
sage, during which the vibration massage can also be activated.
Press the heat button
The heat is radiated through the massage heads
button again to de-activate the heat function; the LED goes out.
z
Automatic programs Relax / Refresh: With the buttons
and ("Refresh") you may start an automatic program, which com-
e
bine Shiatsu and rolling massage in different intensities and posi-
tions. The programs automatically run through different settings. To
stop a program, just choose another function.
To switch off the device: Press the On/Off button
er LED begins to flash and the massage heads travel back
down to the "Park" position. When this position is reached,
the LED extinguishes. If you press the On/Off button
when one of the massage functions is switched on, the vibration
motors just stop immediately. First the massage heads travel down-
wards to the "Park" position. The power LED flashes meanwhile and
then extinguishes.
After each use, switch the device off using the On/Off switch
and remove the plug from the mains socket.
Before cleaning the device, make sure that it is turned off and the
mains plug is removed from the socket. Allow the unit to cool down.
Only clean the Shiatsu massage seat cover with a soft cloth slightly
dampened with a mild detergent (e.g. soap suds). Under no circum-
stances should you use aggressive detergents, strong brushes, sol-
vents or alcohol.
When cleaning, never immerse the unit in water and make sure that
no water gets into the unit.
to activate the function; the LED lights up.
z
. Level indica-
t
. Press the
1
("Relax")
w
. The pow-
4
4
4