Programming Personal Data - Medisana BS 460 Instrucciones De Manejo

ENGLISH

8 Programming personal data

The scales can store data for up to 10 people: sex, age, height.
1. Touch button
3
2. Choose the unit of weight (as described in chapter 4) and press the SET
3. The last used personal data is flashing in the display.
4. Now press
the user profile.
5. Press the SET-button
display. You can choose from four values: Woman, Man, Woman (athletic), Man (athletic).
6. Set your sex by pressing the
in the display.
7. Press the SET-button
8. Select your height using the
9. Press the SET-button
10. Set your age by pressing the
11. Press the SET-button
12. The settings are now concluded.
9 Weighing and measuring the body analysis values
1. Touch button
3
2. Choose the unit of weight (as described in chapter 4) and press the SET
3. The memory location flashes in the display.
4. By pressing the
5. Your personal data is displayed.
6. Wait until "0.0" appears on the display. Step barefoot onto the scales and stand still. Place your
feet on the electrodes
7. Now your weight flashes on the display and body analysis begins. Remain still. After a few sec-
onds the measured values for body fat, body water, KCAL (recommended calories value), bone
weight and muscle mass are displayed. The series of measured values is repeated twice in the
display. The scales then switch off automatically. Step off the scales.
NOTE The data in the following table is for orientation purposes only. If you have any questions about
your health, please consult your doctor. KCAL values are indications that are depending on age,
weight, sex and physical strain.
Body fat proportion range in %
Age
low
10-15 3.0-16
16-30 3.0-16,4
31-60 3.0-17
61-80 3.0-17.6
8
to switch to weight mode - "0.0 kg" appears in the display.
- button or - button
2
to confirm the selection. Now the symbol for the sex is flashing in the
4
- button
to confirm the selection. The preset height starts flashing in the display.
4
- button
to confirm the selection. The preset age starts flashing in the display.
4
- button
to confirm the setting.
4
to switch to weight mode - "0.0 kg" appears in the display.
- button and
2
. First, your weight is displayed.
7
female (%)
normal high
16.1-21 21.1-29.6
16.5-22 22.1-30.4
17.1-22.4 22.5-31.4
17.7-23 23.1-32
to select the desired memory location (P0 - P9) for
5
or - button
2
and - button
2
or - button
2
- button , you may choose the memory location (P0 - P9).
5
very high low
29.7-50 3.0-13
30.5-50 3.0-13.6
31.5-50 3.0-14
32.1-50 3.0-14.4
button to confirm.
4
to select the appropriate symbol
5
.
5
.
5
button to confirm.
4
male (%)
normal high
13.1-17.4 17.5-25.6 25.7-50
13.7-18 18.1-26.4 26.5-50
14.1-18.6 18.7-27
14.5-19 19.1-28
very high
27.1-50
28.1-50