Korona 82002 Manual De Instrucciones página 32

1. POWER (ON/OFF)
Press the button to turn on or off the appliance.
2. MODE button
Switch between cooling, fan, dehumidifying and heating.
3. TIMER
Press the button to set the timing value.
4. SPEED
Press the button to select high, medium, low and auto mode wind speed output.
5. TEMP+ uP
Press the button to increase temperature and timing set value.
6. TEMP- DOWN
Press the button to reduce temperature and timing set value.
7. SLEEP
Press the button to turn on the sleep mode.
8. SWING button
Press the button to change the air flow direction.
9. LAMP button
Press the button to switch ON/OFF the backlight of display on the unit
10. Lock button
Long Press the button to lock / unlock the setting
- Make sure the distance between the appliance and the remote control is not more than 6
metres.
- Aim the remote control at the appliance and make sure that the angle is less than 30
degrees.
BEFORE FIRST USE
• Remove all packaging material and check whether the appliance is complete and that all
accessories are included.
• Fully unwind the power cord.
• Let the appliance rest for 24 hrs in upright position.
If any items are damaged or missing, contact your dealer or customer service.
Warning: Plastic bags are a danger to toddlers and babies, therefore keep them away
to avoid suffocation.
INSTALLATION
INSTALLATION OF THE WINDOW KIT (sliding window)
- Take the window kit and pull the inner part outside until the hole in the outer part is visible.
- Put the T-bolt from the screw set through the hole
- Push the parts of the window slide set back together, making sure the T-part of the T-bolt
slides into the slit of the inner part of the windowslide set lengthwise.
Screw the butterfly nut from the screw set loosely onto the T-bolt.
32