Korona 82002 Manual De Instrucciones página 37

By pressing the Mode key, your portable air conditioner can switch between the
following operation modes: Cooling, Fan, Dehumidifying and Heating.
COOLING MODE
Press the Mode button once or repeatedly until the respective indicator light (cooling).
The appliance is now functioning as an air conditioner
use the UP and DOWN button to increase or decrease the temperature. The temperature
setting ranges from 17-30 °c / 62 ~ 86 °F which will be indicated on the display.
Press the Speed button to switch between the desired speed level (low, medium or high) of
exhaust air. The respective indicator light lights up.
HEATING MODE
Press the Mode button once or repeatedly until the respective indicator light (heating) lights up.
The appliance is now functioning as a heater
use the UP and DOWN button to increase or decrease the temperature. The temperature
setting ranges from 15 - 25 °c / 59 - 77 °F which will be indicated on the LED display.
Press the Speed button to switch between the desired speed level (low, medium and high)
of exhaust air. The respective indicator light lights up.
To switch between celsius and Fahrenheit in cooling or heating mode press both the
temperature – and + keys on the remote control or up and down on the control panel.
FAN MODE
Press the Mode button once or repeatedly until the respective indicator light (fan) lights up.
Press the Speed button to switch between the desired speed level (low, medium, high or
auto fan mode) of exhaust air. The respective indicator light lights up.
The wind speed (ventilation level) cannot be adjusted in Heating, Dehumidification and
Sleep mode. The wind speed is automatically set to low.
DEHUMIDIFYING MODE (DH)
Press the Mode button once or repeatedly until the respective indicator light (dh) lights up.
In this mode, the appliance operates in the lowest speed and will start to remove excess
moisture from the air.
ATTENTION:
The appliance is fitted with an internal water collection tank. Once this container has
reached its capacity the appliance stops functioning and the indicator light "water full"
lights up on the control panel.
If you wish to continue using the appliance, the water container needs to be emptied.
Please follow the steps under CLEANING AND CARE – Emptying the Water Tank.
SLEEPING MODE
The device has a sleep function. If you turn on this function, the device will operate in its most
silent and energy saving mode.
Attention: the sleep function only works in the "cOOL" mode.
1. Press the Sleep button to turn on the sleep function. The device switches to the lowest
and most energy saving mode.
2. Press the Sleep button again to turn off the sleep function.
Instruction Manual
ENGLISH
37