Cranks Installation - Rotorbike POWER RPM1 Manual De Usuario

WARNING!
Read and understand this manual carefully
before installing your cranks.
Improvement of product specifications may
occur without any prior notification.
COMpAtIbILIty
ROTOR Power is compatible with BB30, Pressfit30,
BBright, BBright Direct fit, BSA, ITA, BB86 and 386
frames.
For more information consult your ROTOR Authorized
Dealer or bike dealer to ensure correct compatibility
of ROTOR Power with your frame.
Visit our website: www.rotorbike.com
Follow the instructions in this manual to install and
calibrate your ROTOR Power.
26
USER MANUAL - CRANK INSTALLATION

CRANkS INSTALLATION

When installing your ROTOR Power for the first time,
complete the following steps:
1. Road / MTB spacer verification (page 27 and 28).
2. Non-drive side crank assembly installation (page 29).
3.
Drive side crank assembly installation (page 29).
4.
Fixing of drive side assembly (page 30).
5. Preload adjustment and fine adjustment (page 30).
WARNING!
Ensure there is no interference between
the cranks and the frame, or any other
component part.