Warning; Stroller Assembly; Open Stroller; Assemble Front Wheels - Joie nitro Manual De Instrucciones

WARNING

!
WARNING Always use the crotch combination with the waist belt. The
shoulder harnesses should be used as well.
!
WARNING Ensure that all the locking devices are engaged before use.
!
WARNING Do not let your child play with this product.
!
WARNING Check that the pram body or seat unit attachment devices
are correctly engaged before use.
!
Adult assembly required.
!
Use the stroller with a child weighing less than 15kg. It will cause dam-
age to the stroller with an unfitted child.
!
To prevent a hazardous, unstable condition, do not place more than
4.5kg in the storage basket.
!
Never leave child unattended. Always keep child in view while in stroller.
!
Use the stroller with only one child at a time. Never place purses, shop-
ping bags, parcels or accessory items on the handle or hood.
!
Overloading, folding incorrectly, or using component parents from other
manufacturers may cause the stroller to be damaged, broken or unsafe.
Please read the instruction manual carefully.
!
Never use it along with component parts from other manufacturers.
!
Please read all the instructions in the manual before using the product.
Please save instruction manual for future use. Failure to follow these
warnings and instructions may result in serious injury or death.
!
Safety belts and restraint systems must be used correctly.
!
To avoid serious injury from falling or sliding out, always use seat belt.
!
Make sure your child's body is clear from the moving parts when adjust-
ing the stroller.
!
Child may slip into leg openings and be strangled if the harness is not
used.
!
Never use stroller on stairs or escalators.
!
Keep away from high temperature objects, liquids, and electronics.
!
Never allow your child to stand on the stroller or sit in the stroller with
head toward front of stroller.
!
Never place the stroller on roads, slopes or dangerous areas.
!
Do make sure all mechanisms are fixed before using the stroller.
!
To avoid strangulation, DO NOT place items with a string around your
child's neck, suspend strings from this product, or attach strings to toys.
!
To prevent tipping DO NOT put anything on the handle.
!
DO NOT lift stroller while child is in stroller.
!
DO NOT use storage basket as a child carrier.
!
To prevent tipping, never let child climb the stroller. Always lift the child
in and out of the stroller.
9
!
To avoid finger entrapment, use care when folding and unfolding the
stroller.
!
Be sure the stroller is fully open or folded before allowing child near the
stroller.
!
To ensure your child's safety, please make sure all parts are assembled
and fastened properly before using the stroller.
!
To avoid strangulation, do make sure your child is clear from the hood.
!
Always engage the brakes when parking the stroller.
!
Discontinue using stroller if it is damaged or broken.
!
Stroller to be used only at walking speed. This product is not intended
for use while jogging.
!
To avoid suffocation, remove plastic bag and packaging materials be-
fore using this product. The plastic bag and packaging materials should
then be kept away from babies and children.
!
This product is not suitable for running or skating.
!
Pushchair designed to be used from birth shall recommend the use of
the most reclined position for new born babies.
!
The parking device shall be engaged when placing and removing chil-
dren.

Stroller Assembly

Please read all the instructions in this manual before assembling and using this product.

Open Stroller

Separate storage latch from storage mount 1 , and then lift the handle upwards
- 2
downwards with foot , a click sound means the stroller is open completely.
2
!
Check that the stroller is completely open before continuing.

Assemble Front Wheels

Assemble front wheels to front legs. Check that wheels are securely attached by pulling on wheel assemblies.
To disassemble front wheel, detach front wheel from front leg
- 1
4

Assemble Rear Wheels

Assemble rear wheels to rear legs . Check that wheels are securely attached by pulling on wheel assemblies.
5
Snap the brake cable into the fixing tabs under square tubes to fix it.

Assemble Hood

Align the holes of the hood mounts with the posts on the tubes, and then insert to assemble the hood
- 1
2 , push the foot plate
3
- 2
4 while pressing the release tabs outwards.
6
, stick
7
10