Maintaining The Appliance - Dirt Devil REBEL35 Manual De Instrucciones

18

Maintaining the appliance

Emptying the dust bin
Switch off the appliance and pull the plug from
1
the socket. Press the dust bin release catch
2
(Fig. 1 / ) and remove the dust bin from its console
5
in the appliance (Fig. ).
13
above a waste bin and release the dust bin (Fig.
Dispose of the contents of the dust bin in a waste
4
bin. Gently tap out the dust bin to remove any soil-
ing. Close the emptied dust bin.
5
dust bin into its console in the appliance so that you
feel it click into place.
Cleaning the separator and filter
NOTE:
The appliance, the separator and the pre-motor
filter should be cleaned regularly in order to
maintain the suction power. Empty and clean the
dust bin at the latest when the cleaning/empty-
ing display lights up (fig.
Remove the dust bin from the appliance, >"Emp-
1
tying the dust bin" on page 18.
dust bin cover release (fig.
pre-motor filter (Fig. ).
15
gether with the separator cover, from the dust bin
(fig. ). Release the separator cover (fig.
16
5
Remove the cover from the separator (Fig.
6
Remove the separator and dispose of the con-
7
tent in a waste bin. Rinse the pre-motor filter and
8
the separator out thoroughly under running water.
Leave the cleaned parts to dry completely for at
9
least 24 h. Insert the separator cover into the sep-
9
arator. Insert the separator cover into the separa-
10
tor (fig. 19 ). Insert the separator, together with
11
the separator cover, into the dust bin (Fig.
Place the pre-motor filter on the dust bin (Fig.
Close the dust bin cover.
13
into its console on the appliance body. You must be
able to feel the dust bin click into place.
Cleaning the exhaust filter
CAUTION!
The fine fins on the exhaust filter are sensitive.
Never clean the fins with water and only ever use
soft brushes for cleaning.
NOTE:
Replace any damaged, discoloured or deformed
exhaust filters with new ones.
Place dust bin closely
3
14
Re-insert the
6
13 ).
Push the upper
2
1 / ). Remove the
1 3
Remove the separator, to-
4
).
17
18 ).
).
20
12
).
21
Re-insert the dust bin
14
EN
Press the key to release the exhaust filter cov-
1
er and flip the exhaust filter cover away towards the
rear (fig. ). Remove the exhaust filter by pull-
22
2
ing on the catch (Fig.
haust filter. Carefully clean the exhaust filter with a
4
soft brush. Re-insert the exhaust filter into its con-
5
sole on the appliance (Fig.
ring clockwise.
).
Cleaning the mini turbo nozzle
Disconnect the mini turbo nozzle from the handle
1
or the telescopic tube.
ti-clockwise (fig.
24
ance top of the mini turbo nozzle (Fig.
oughly clean the brush by hand. In case of stubborn
soiling, carefully use tweezers or scissors (Fig.
Place the appliance top on the 4 tabs on the appli-
5
ance bottom and then carefully close the appliance
top. Push the circlip back on.
6
Accessories
• Filter set (1 dual pre-motor filter, 1 exhaust filter) –
2225001 (fig.
27
• Filter unit (filter screen, filter cup) – 2210005
(fig. /B)
27
• 1 parquet brush – M203-5 (fig.
• 1 mini turbo brush "Fellino" – M219 (fig.
• 1 midi turbo brush – M221 (fig.
• 1 long flexible crevice nozzle – M232 (fig.
• 1 hard floor nozzle – M236-1 (fig.
• 1 carpet nozzle – M242 (fig.
(*) optional
Troubleshooting
Before you contact our customer service department
or send the appliance to the Dirt Devil customer ser-
vice department, you will find a lot of additional in-
formation in the service area of our website which
will help you solve problems.
www.dirtdevil.de/service
!
WARNING!
Switch off the appliance before you start trouble-
shooting. Never use a faulty appliance.
). Carefully tap out the ex-
23
3
). Turn the retaining
23
6
Turn the retaining ring an-
2
). Carefully open up the appli-
3
).
25
/A)
/C)(*)
27
27
27 /G)(*)
/D)(*)
27
/D)(*)
27
Thor-
4
26 ).
/F)(*)
/H)(*)
27