CICSA ZETA ZT 800x500 Manual De Instrucciones página 14

TMU English - User guide
Electrotechnical for low voltage ITC-BT-27 September 2003
The towel radiator complies with the CLASS I safety regulations.
It can be installed in volumes 2 and 3, positions A and B, provided
that the following rules are respected:
- In the bathroom, it should never be installed in such a way that
switches or other electrical devices is at less than 60 cm from
the bath or shower.
INSTALLATION
The installation, handling or improper use of the towel radiator will be the immediate reason for the cancellation
of the warranty offered on the product. The installation must be carried out by a qualified professional or another
fully competent person. It must be installed following the corresponding European standards.
Make sure you have the necessary equipment for your personal protection before starting the installation. Check
that you have all the components listed in the accessory box ready and that the towel radiator size is what you
need, before you start with the installation.
Box contents (example ZT y ZX)
1 x
Towel
Radiator
3 x
Support
(a)
3 x
Support
(b)
Installation advice
Step 1
Select the desired mounting position and check that the wall is suitable to place
the blocks and support the weight of the radiator filled with water. Mark the
chosen position of the brackets on the wall and drill holes to the extent of the
fixations you are using. The wall plugs (e) supplied are only suitable for solid
walls. If the wall is another type of wall prefabricated, you will have to use the
appropriate fixing means.
Step 2
Screw the support base (a) to the wall using the wall screws (f) and washers (g)
supplied.
14
Dry-towel models ZT, ZX, PUKITA, TUBÓN, DIJON, CUADRO, KARNAK, VERONA and ELFIE
3 x
Frontal
support
(c)
3 x
Support Cap
(d)
3 x
Universal
Fixing Pluge
(e)
3 x
Wall Screw
(f)
3 x
Ring
(g)
3 x
Support
Screw (h)
3 x
Small
Screw
(i)
1 x
Purge
Pluge
(j)
1 x
Blind
Pluge
(k)