CICSA ZETA ZT 800x500 Manual De Instrucciones página 17

Dry-towel models ZT, ZX, PUKITA, TUBÓN, DIJON, CUADRO, KARNAK, VERONA and ELFIE
OPERATING THE DEVICE
Press the [ ] button to select the desired operative mode. An icon on the display indicates the selected
operating mode, according to the following table:
FIL-PILOTE COMFORT
FIL-PILOTE MODE (Only for product versions equipped with "Fil-Pilote")
In "Fil-Pilote" mode the device is managed by a central control system that sets the operating mode for all the
connected devices. The device operates with the most advanced "Fil-Pilote" system with six commands, which
allows the following functions:
1. Standby: power off the heating element, the device remains active.
2. Comfort: maintains the "Comfort" temperature set by the user.
3. Eco: maintains the room temperature 3,5°C below the "Comfort" temperature.
4. Antifreeze: maintains the room temperature at 7°C.
5. Eco-1: maintains the room temperature 1°C below the "Comfort" temperature.
6. Eco-2: maintains the room temperature 2°C below the "Comfort" temperature. The user can set the desired
temperature on the device:
-Press the [Prog] button until the "Fil-Pilote" icon is displayed.
Set the desired temperature through the [+] and [-] buttons and wait until the displayed temperature stops
COMFORT MODE [ ]
The "Comfort" stably maintains the room temperature to a selected value. To set this operative mode:
-Press the [ ] button until the display shows the "Comfort" icon
-Set the desired temperature through blinking.
NIGHT MODE [ ]
The "Night" mode sets a value of temperature below the "Comfort" temperature value.
It is suggested to set this operating mode during the night or when the room is not occupied for 2 or more hours.
-Press the [ ] button until the display shows the " Night" icon
-Set the desired temperature through [+] and [-] buttons and wait until the displayed temperature stops blinking.
ANTIFREEZE MODE [ ]
In "Antifreeze" mode the temperature is fixed to 7°C. The device activates the heating element when the room
temperature falls below 7°C. It is suggested to set this operating mode when the room is not occupied for several
days.
Press the [ ] button until the display shows the "Antifreeze" icon.
TIMER-2H MODE [ ]
The "Timer 2h" mode can be used to quickly warm up the room or to speed up towel drying.
-Press the [ ] button until the display shows the "2h" icon.
The device is activated at the maximum power for 2 hours, up to a maximum room temperature of 32°C. The
"Timer-2h" mode is automatically deactivated after a period of 2 hours and the device returns to the operative
mode previously set. The user can switch to another operative mode at any time by simply pressing the [
button.
CHRONO MODE [ ]
This operating mode allows the user to configure different temperature values for each hour of each day of the
week. The "Comfort" / "Night" temperatures and the related time intervals can be thus programmed.
-To activate this function, press the [
NIGHT ANTIFREEZE
] button until the "Chrono" icon is displayed.
English - User guide
TIMER 2H CHRONO
TMU
]
17