Technical Data; First Use - SATA air star F Instrucciones De Servicio

Operating Instructions SATA air star F
EN
[1-3] Mask cap
Exhaling membrane
[1-4]
Breathing filter
[1-5]

7. Technical Data

Description
Operating temperature
Storage temperature
Weight incl. 2x A2P3 filters and
pre-filter holder

8. First Use

8.1. Assemble the half mask
Note!
When assembling the half mask, do not press against the thin braces in
the exhaling part.
■ Position the head straps and the lower straps.
■ Fit the mask cap in the nose section of the mask body.
■ Press the mask cap firmly onto the exhaling valve part until it slots in
completely, without squeezing the head straps and lower straps.
■ Check easy movement of the head straps and lower straps.
8.2. Insert pre-filter
■ Assemble breathing filter with pre-filter and pre-filter holder (see chap-
ter 10.2).
8.3. Insert breathing filter and clean half mask
Note!
Before using for the first time, the half mask must be cleaned thoroughly
with the provided cleansing wipes.
■ Insert breathing filter in half mask (see chapter 10.1).
■ Clean mask body [9-4] and rubber seal[9-3] thoroughly with the en-
closed cleansing wipes [9-5] .
86
[1-6] Pre-filter
Pre-filter cap
[1-7]
-30 °C – +60 °C
-10 °C – +55 °C
385 g