IKRA GBHI 750 Instrucciones De Manejo página 29

Maintenance
Clean the outside of the machine.
Make sure the throttle trigger lock and the
throttle function correctly from a safety point of
view.
Check that the engine switch works correctly.
Check that the blades do not move when the
engine is idling or when the choke is in the start
throttle position.
Check that the blades are undamaged and
show no signs of cracking or other damage.
Replace the blades if necessary.
Check that the blade guard is not damaged or
distorted. Replace the blade guard if it is bent
or damaged.
Clean the air filter. Replace if necessary.
Check that nuts and screws are tight.
Check that there are no fuel leaks from the en-
gine, tank or fuel lines.
Check the starter and starter cord.
Clean the outside of the spark plug. Remove it
and check the electrode gap. Adjust the gap to
0.6-0.7 mm or replace the spark plug. Check
that the spark plug is fitted with a spark plug
cap.
Clean the machine's cooling system.
Clean the outside of the carburetor and the
space around it.
Check the flange, cap and nut are assembled
correctly and tightened
Clean the fuel tank.
Check all cables and connections.
GB | Operating Instructions
MAINTENANCE
Good maintenance is essential for safe, economical and
trouble-free operation. It will also help reduce air pollution.
The purpose of the maintenance and adjustment sched-
ule is to keep the machine in the best operating condition.
Turn off the engine before performing any maintenance. If
the engine must be run, make sure the area is well venti-
lated. The exhaust contains poisonous carbon monoxide
gas.
Please always select recommended accessories. The
accessories which have not equivalent quality may dam-
age the machine.
Please never use non approved components and remove
the safety devices after or during maintenance.
Daily
maintenance
X
X
X
X
X
X
X
X
X
GB-10
Weekly
maintenance maintenance
X
X
X
X
X
Monthly
X
X