Data Transmission - Apex SpO2 Manual De Uso

English

9. Data transmission

The device can be connected to computer with the special cable designed for this unit.
Data transmission mode
Data transmission mode: General data transmission and memory transmission.
General data transmission is to have the current heart rate and SpO
linking the transmission cable to the plug on the top of the SpO
30 seconds.
Memory data transmission is to be processed in the memory mode. Connect the
transmission cable to the connecting port of the device at one end and to the
computer (please refer to the software introduction in the instruction manual about
the built-in Microsoft Windows
memory transmitted to the computer for printing.
Cable and connecting port:
Cable
The cable is with DB9 connector on one end to be connected to computer and the
other end is for earphone plug connected to this device.
WARNING: Inadequate connection will cause damage to the device.
Please use the cable provided for this device.
USB cable is enclosed (alternative) for use. Connect one end of the USB cable to
the computer and the other end to the phone jack of the device. The USB cable is to
be used with the CD software enclosed in the package.
Port
The port on the top of the device is for data transmission (Fig 9-1).
WARNING: Please do not plug any foreign object or unspecified plug to the
device for protection.
transmitted by
2
device at a rate of
2
®
) at the other, press to have the data in
Fig 9-1
19