Apex SpO2 Manual De Uso página 9

English
Power off
Automatic power off
The device will turn itself off automatically after 1-minute idling with two beeps
sounded.
Power off button
Press button for 2 seconds to turn off the device without any beep sounded.
5.2 Alert
Max./Min. SpO
2
Max./Min. alarm
While the alarm is activated (that is, the
exceeds the Max./Min. threshold; the device will sound the alarm with two beeps
continuously until pressing the
appear on the screen and with yellow backlight flickering once per second. If SpO
continues to exceed the Max./Min. threshold after 2 minutes, the alarm will be
activated again (alarm will go off continuously).
The alarm will be off permanently if it is setup to be so (the
screen); however, the or
second continuously, please refers to 5.2.1.2 (Please refer to 5.4 "Alarm off").
The heartbeat sound is off while the alarm is on.
Max./Min. alert flickering
No matter the alarm is on or off (the
and Yellow backlight flickers twice every second continuously while the
SpO exceeds the Max./Min. threshold.
2
Max./Min. pulse rate
Max./Min. alarm
While the alarm is activated (that is, the
rate exceeds the Max./ Min. threshold; the device will sound the alarm with two
beeps continuously until pressing the
will appear on the screen and with yellow backlight flickering once per second. If
pulse rate continues to exceed the Max./Min. threshold after 2 minutes, the alarm
will be activated again (alarm will go off continuously).
The heartbeat sound is off while the alarm is on.
or is not on the screen) and SpO
to turn off the device; moreover, the will
appears on the
and Yellow backlight will flicker once every
or is on the screen), the
or is not on the screen) and pulse
to turn off the device; moreover, the
7
2
2
or