Transfer Data To "Bp Manager - SANOTEC MD 15236 Manual De Uso

Transfer data to "BP Manager"

The program transfers ALL data saved in the blood
pressure monitor to the software.
Before transferring the data, make sure that the monitor
contains data that you want to transfer to your
computer.
Proceed as follows:
Start the program BPMcomm and in the "User"
dialogue enter the patient whose data are saved in
the blood pressure monitor and which you want to
transfer to the computer.
If several patients are already set up, select the
required patient by pressing the adjacent button.
Insert the USB connection on the supplied cable
into an empty USB port on your computer.
Insert the other end of the cable into the socket on
the blood pressure unit.
Is the unit is switched off, switch it on by pressing
the M button.
If the speaking function is activated, wait until the
command has finished.
Do not use the on/off switch to turn the device on/off if
you are not planning to measure your blood pressure
and the device is not attached to your wrist (otherwise
the inflation pump will start working).
30