palintest PAASense Manual De Instrucciones página 4

3
Instrument Operation
The PAASense has three operating modes:
Analysis Mode
Perform a test. See page 4
Check Standard Mode
Run the check standards.
See the calibration check standard instructions (with
CS181 PAASense Check Standards) for details.
Set Up Mode
Change the instrument settings. See page 13
Analysis Mode – For Testing
Water Samples
1
Press the power button.
2
Ensure the calibration code shown on screen matches
with the batch number printed on the foil of the sensor.
3
To accept the calibration, press the right button.
See Performing a Test (Analysis Mode) – Page 5
To change the calibration, press the left button
See Entry of New Calibration Code – Page 11
4