Dc And -48V Dc Equipment - Lucent Technologies 300584935 Manual De Uso

+24V dc and -48V dc Equipment
Page 2 of 32
2. If the product has been exposed to rain or liquid.
3. If the product does not operate normally by following the operating
instructions.
4. If the product has been dropped or the cabinet has been damaged.
5. If the product exhibits a distinct change in performance.
!
DANGER:
To reduce the risk of electrical shock, do not disassemble this product. Instal-
lation and service should be performed by trained personnel only.
!
DANGER:
Never push objects of any kind into this equipment through slots as they
may touch dangerous voltage points or short-out parts that could result in a
risk of fire or electrical shock. Never spill liquids of any kind on this equip-
ment.
!
DANGER:
Never install telecommunication wiring during a lightning storm.
!
DANGER:
Never install telecommunication connections in wet locations.
!
DANGER:
Never touch uninsulated telecommunication wires or terminals unless the
telecommunication line has been disconnected at the interface.
!
WARNING:
Slots and openings in this equipment are provided for ventilation. To protect
the product from overheating, these openings must not be blocked or cov-
ered. This product should not be placed in a built-in installation unless
proper ventilation is provided.
!
WARNING:
Use caution when installing or modifying telecommunication lines.
!
DANGER:
Installation must include an independent frame ground drop to the building
ground. Refer to the installation instructions provided with this product.
!
DANGER:
This equipment must be provided with a readily accessible disconnect device
as part of the building installation. The disconnect device must be suitable
for the rated voltage and current specified in the PSAX installation guide.
SAVE THESE INSTRUCTIONS
®
PacketStar PSAX Multiservice Media Gateways
Safety Guidelines