Technical Data; Transport And Storage - Grundfos DSS Serie Manual De Instalación Y Operación

Outlet
valve
Back
pressure
valve
1/2" tube
Pressure
relief
valve
1/2" tube
1/2" tube
Fig. 5 Triplex DSS with junction box, see pos. 18 in fig.

5. Technical data

The values stated in the technical data of the
components must be observed.
Caution
For the entire system, the value of the component
with the most limited value applies.
The dosing medium must be in liquid state. Observe
Caution
the freezing point of your dosing medium.
Refer to the installation and operating instructions of the dosing
pump and characteristic of the dosing medium.

6. Transport and storage

Transport the DSS system carefully and only at
Caution
temperatures above 41 °F (5 °C).
Risk of breakage.
The DSS system is tested for tightness in the factory.
Note Note
Some residual water may still be present in the
fittings and pipes.
• Check the DSS system for transportation damage or missing
parts.
• Store the DSS system in a sheltered place at temperatures
between 41 and 113 °F (5 and 45 °C).
10
160 psi
pressure
gauge with
PI
isolator
Sample or
bleed valve,
or relief valve
1/2" pipe
2
PI
1/2" pipe
Grundfos
Smart Digital
pump
Junction
box
250/500 mL
calibration column
Inlet valve
Y strainer