Receiving A Call; Transmitting (Sending); Important; Changing Channels - HAEGER Xplorer FX-30 Manual De Instrucciones

English
8.4

Receiving a call

The unit is continuously in received mode when it is turned on and
not transmitting. When a signal is received on the current channel
the receive signal icon
8.5

Transmitting (sending)

The transmission on these units is "one way-at-a-time." While you are speaking,
you can not receive a transmission.
These PMR's are an open-license band. Always identity yourself when are
transmitting on the same channel.
a. Press and hold the PTT (push to talk) button to transmit your
b. Hold the unit in a vertical position with the MIC (microphone) 5
c. Release the PTT button when you have finished transmitting.

Important

 In order for other people to receive your transmission, they must also be
on the same channel that you are currently using. Refer to the "changing
Channels" section for more information.
 When the PTT and/or CALL buttons are continuously pressed, your PMR
can not receive any transmissions.
8.6

Changing Channels

The PMR has 8 available channels to communicate with other PMR users within a
range; you must all have your PMR tuned in to the same channel.
a. Press the MENU button, the current channel number and
b. While it is blinking, press the
c. Press the PTT button to confirm your setting and return to
voice. The transmit signal icon will display on the LCD screen.
cm away from the mouth while holding the PTT button; speak
into the MIC (microphone) in a normal tone of voice.
channel icon "ch" on the LCD screen will start blinking.
select the desired channel. The channel changes from 1 to 8 or
from 8 to 1.
standby mode.
will be displayed on the LCD screen.
(UP) or (DOWN) button to
8