Vox (Voice Activated Transmission) Mode; Monitor; Channel Auto Scan - HAEGER Xplorer FX-30 Manual De Instrucciones

English
To activate this feature:
a. Press the MENU button four times, the icons flashes on the
b. Press the
c. Press the PTT button to confirm your setting.
8.10

VOX (voice activated transmission) mode

In VOX mode your handset will transmit whenever it detects your Voice (or other
noise) without the PTT button having to be pressed.
To turn VOX mode ON and OFF:
a. Press the MENU button five times. VOX icon is displayed and
b. Press the
c. Press the PTT button to confirm your setting. As long as the
VOX operation is not recommended if the PMR will be used in a noisy or
windy environment.
8.11

Monitor

You can use the Monitor feature to check for weak signals on the current channel.
a.
b. If you hear constant noise and hissing sound, press the MENU
8.12

Channel auto scan

Channel scan perform searches for active signals in an endless loop from channels
1 to 8. This allows you to find other radios without having to change channel. To
activate this feature:
display.
(UP) button to activate or
the Roger tone feature.
"OF" flashes on the LCD panel.
(UP) button to activate or
the VOX feature.
handset is in VOX mode, VOX is shown steadily on the display.
To activate the monitor function, press the MENU and
button at the same time
button once to turn Off the monitor function.
.
10
(DOWN) to deactivate
(DOWN) to deactivate
(UP)