Key Lock; Auxiliary Features; Lcd Screen Back Light; Power Saving - HAEGER Xplorer FX-30 Manual De Instrucciones

a. Press the MENU and
b. When an active signal (on one of the 8 channels) is detected,
c. Press the PTT button to communicate through the active signal
d. Press the MENU button to stop the channel scanning operation.
8.13

Key lock

The key lock feature allows the user to disable the UP or DOWN and the MENU
buttons so that the PMR settings can not be changed accidentally.
a. To activate the key lock feature, press and hold the MENU
b. To deactivate the key lock feature, press and hold the MENU
9 A
UXILIARY
9.1

LCD Screen Back Light

Every time a button is pressed (except PTT and CALL button), the LCD Screen back
light will illuminate for 4 seconds.
9.2

Power saving

Your PMR unit has special circuitry designed to extend the life of your battery.
When the unit is not used for 4 seconds, it will automatically switch into a low
power mode. The power saving feature does not affect the PMR ability to receive
transmission, when a signal is detected, It automatically returns to full power
mode.
on the LCD screen changes rapidly until an active signal is
detected.
channel scan pauses on the active channel.
channel, then the channel scan will be deactivated. Or press
the (UP) or
scanning.
button until the key lock icon appears on the LCD screen.
button again until the key lock icon disappears on the LCD
screen. The PTT, CALL, and the POWER buttons will remain
functional even if the key lock feature is activated.
F
EATURES
(DOWN) button. The channel number
(DOWN) button to continue the channel
11
English