dyso Pure Hot + Cool Manual De Instrucciones página 76

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 60
EN
USING YOUR DYSON APPLIANCE
PLEASE READ THE 'IMPORTANT SAFETY INSTRUCTIONS' IN
THIS DYSON OPERATING MANUAL BEFORE PROCEEDING.
LOOKING AFTER YOUR DYSON APPLIANCE
Do not carry out any maintenance or repair work other than that shown in this
Dyson Operating Manual, or advised by the Dyson Helpline.
Always disconnect the plug from the mains before inspecting for problems. If the
appliance will not operate, first check the mains socket has an electricity supply
and that the plug is properly inserted into the socket.
OPERATION
Ensure appliance is fully assembled in line with the instructions before use.
Do not dismantle the appliance or use without the loop amplifier fitted.
The appliance will not operate in heating mode unless the target temperature is
above the room temperature.
Each time the heating mode is selected, it conducts a short calibration cycle.
Airflow will be automatically controlled during this cycle. Once the calibration
cycle is complete, it will revert to the selected airflow speed.
The appliance will not oscillate when the control buttons are pressed.
Do not lubricate any part of this appliance.
CONTROL WITHOUT THE REMOTE
Press the power button on the appliance to turn ON/OFF.
Press and hold the standby button on the appliance to adjust the target
temperature. The target temperature will increase to a maximum before
decreasing. If the target temperature is set at 0°C it will switch from heating to
cool mode.
The airflow, diffused and focused modes, oscillation function and sleep timer
controls cannot be operated without the remote control.
LED DISPLAY
The LED Display will dim after 10 seconds of use (the power button does
not dim).
Press any button, other than the standby ON/OFF, to reactivate.
Do not press standby ON/Off as this will turn the appliance off.
SLEEP TIMER
To set the sleep timer, press and hold the timer button to select the desired time.
When time reaches zero, the appliance will go into standby mode. To cancel,
increase the time until two dashes appear.
The LED display will turn off after 10 seconds of inactivity - this is a power saving
feature and avoids light interference at night time.
Press any button, other than the standby ON/OFF, to reactivate.
When sleep timer is ON, do not press the standby ON/OFF as this will turn the
appliance off and turn sleep timer off too.
TILT FUNCTION
Carefully hold the base and the main body. Tilt the amplifier forward or
backward for the required airflow angle.
AUTOMATIC CUT-OUT
For your safety this appliance is fitted with automatic cut-out switches that
operate if the appliance tips over or overheats. If the switches operate, unplug
the appliance and allow it to cool. Before restarting the appliance check and
clear any blockages and ensure the appliance is on a solid level surface.
In heating mode the appliance will automatically switch 'OFF' after 9 hours of
continuous use and will return to standby mode. To restart the machine, press
the power button on either the remote control or the base.
TROUBLESHOOTING
Fault codes F4, F5, F6: If one of these appears on the display, unplug the
appliance, wait for 30 to 60 seconds and/or plug the appliance into a
different socket. If you continue to receive the fault code, please contact the
Dyson Helpline.
Fault codes F2, F3, F7: If one of these appears on the display, please contact the
Dyson Helpline.
REPLACEABLE PARTS
BATTERY REPLACEMENT
CAUTION
Unscrew the battery compartment on the remote control. Loosen the base and
pull to remove the battery.
Do not install backwards or short circuit the batteries.
Do not attempt to dismantle or charge the batteries. Keep away from fire.
Always replace the screws in the remote control.
Follow battery manufacturers' instructions when installing new batteries
(battery type CR 2032).
Limited functionality is available without the remote control (see 'Control without
the remote').
NON-WASHABLE FILTER UNIT
Your filter unit is non-washable and non-recyclable.
To replace your filter unit follow the steps as shown.
Failure to replace the filter when prompted may result in changes to product
performance and appearance.
A new filter unit can be purchased at www.dyson.com/filter.
76
DISPOSAL INFORMATION
Dyson products are made from high grade recyclable materials.
Recycle where possible.
Dispose of or recycle the battery in accordance with local ordinances
or regulations.
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact
the retailer where the product was purchased. They can take this product for
environmentally safe recycling.
Keep the used batteries away from children as these can still harm children
if swallowed.
Your filter unit is non-washable and non-recyclable.
Dispose of the exhausted filter in accordance with local ordinances
or regulations.
The battery should be removed from the product before disposal.
GUARANTEE TERMS AND CONDITIONS
DYSON CUSTOMER CARE
THANK YOU FOR CHOOSING TO BUY A DYSON APPLIANCE.
After registering your free 2 year guarantee, your Dyson appliance will be
covered for parts and labour for 2 years from the date of purchase, subject
to the terms of the guarantee. If you have any questions about your Dyson
appliance, call the Dyson Helpline with your serial number and details of where/
when you bought the appliance. Most questions can be solved over the phone
by one of our trained Dyson Helpline staff.
Alternatively, visit www.dyson.com for online help, general tips and useful
information about Dyson.
Your serial number can be found on your rating plate which is on the base of
the appliance.
If your Dyson appliance needs a service, call the Dyson Helpline so we can
discuss the available options. If your Dyson appliance is under guarantee, and
the repair is covered, it will be repaired at no cost.
PLEASE REGISTER AS A DYSON
APPLIANCE OWNER
To help us ensure you receive prompt and efficient service, please register as a
Dyson appliance owner. There are three ways to do this:
Online at www.dyson.com/register.
Telephone the Dyson Helpline on 0800 298 0298.
Complete the enclosed form and post it to us.
This will confirm ownership of your Dyson appliance in the event of an insurance
loss, and enable us to contact you if necessary.
LIMITED 2 YEAR GUARANTEE
TERMS AND CONDITIONS OF THE DYSON 2 YEAR
LIMITED GUARANTEE
WHAT IS COVERED
The repair or replacement of your Dyson appliance (at Dyson's discretion) if it
is found to be defective due to faulty materials, workmanship or function within
2 years of purchase or delivery (if any part is no longer available or out of
manufacture Dyson will replace it with a functional replacement part).
Where this appliance is sold outside of the EU, this guarantee will only be valid if
the appliance is used in the country in which it was sold.
Where this appliance is sold within the EU, this guarantee will only be valid (i) if
the appliance is used in the country in which it was sold or (ii) if the appliance is
used in Austria, Belgium, France, Germany, Ireland, Italy, Netherlands, Spain or
the United Kingdom and the same model as this appliance is sold at the same
voltage rating in the relevant country.
WHAT IS NOT COVERED
Replacement filters. The appliance's filter is not covered by the guarantee.
Dyson does not guarantee the repair or replacement of a product where a
defect is the result of:
Damage caused by not carrying out the recommended appliance maintenance.
Accidental damage, faults caused by negligent use or care, misuse, neglect,
careless operation or handling of the appliance which is not in accordance with
the Dyson Operating Manual.
Use of the appliance for anything other than normal domestic
household purposes.
Use of parts not assembled or installed in accordance with the instructions
of Dyson.
Use of parts and accessories which are not genuine Dyson components.
Faulty installation (except where installed by Dyson).
Repairs or alterations carried out by parties other than Dyson or its
authorised agents.
Blockages – please refer to the illustrations and the section 'Clearing
blockages' in this Dyson Operating Manual for details of how to look for and
clear blockages.
Normal wear and tear (e.g. fuse etc.).
Reduction in battery discharge time due to battery age or use (where
applicable).
If you are in any doubt as to what is covered by your guarantee, please contact
the Dyson Helpline.
SUMMARY OF COVER
The guarantee becomes effective at the date of purchase (or the date of delivery
if this is later).

Publicidad

Tabla de contenido
loading

Tabla de contenido