Technical Data; Function Of The Unit; Description - Rothenberger ROWELD P 110 Instrucciones De Uso

17 Avoid unintentional activation. When plugging the tool in, make sure that the switch is
turned off.
18 Use outdoor extension cords. When outdoors, use only extension cords that are approved
and appropriately marked.
19 Be alert. Pay attention to what you do. Approach your work sensibly. Do not use the electric
tool when you are distracted.
20 Check the electric tool for damage. Before using the electric tool, you must inspect safety
equipment or slightly damaged parts carefully to ensure that they work properly and as in-
tended. Check to see that the moving parts operate freely and don't stick, and to make sure
no parts are damaged. All parts must be mounted properly and meet all the conditions for
ensuring trouble-free operation of the electric tool.
Damaged safety equipment and parts must be properly repaired or replaced by a profes-
sional facility, unless otherwise indicated in the user manual. Damaged switches must be
replaced by a customer service facility.
Never use an electric tool whose switch cannot be turned on and off.
21 Caution. Using other insertion tools and accessories may cause injury.
22 Have your tool repaired by an electrical expert. This electric tool meets applicable safety
requirements. Repairs must be made only by an electrical expert using original replacement
parts. Otherwise accidents many occur.
2

Technical Data

Welding range Ø (mm) .................................... 20 - 110
Pressure range ............................................... SDR series see welding parameter book
Max. traverse path (mm) ................................ 165
Heating element:
Power supply .................................................. 230V AC / 115V AC, 50/60Hz, 800W
Heating plate dimension (mm) ........................ 180 x 130
Protection / Protection class ............................ I / IP20
Weight (kg) ..................................................... 2,6
Weights:
Complete machine (kg) ................................... 11,3
Complete machine with transport box (kg) ...... 43,0
Dimensions:
Machine in transport box (mm). ...................... 540 x 345 x 355 (LxWxH)
3

Function of the Unit

3.1

Description

ROWELD P 110 is a compact, easy to handle and easy to transport heating plate butt fusion
plastic pipe welding machine. Welding joints on pipes made of PE-, PVDF- and PP with outer
Diameter of 20 to 110 mm can be produced with the machine safely.
The machine basically consists of:
Basic unit with bench mounting fixture, hand operated trimmer, electronically controlled heating
plate, main clamp set for pipe-to-pipe (110 mm) and left side fittings clamp (110 mm) for pipe to
fitting weldings, reduction clamping inserts, tools, table clamp and steel carrying case.
For precise welding of flanges and pre-fabrication a flange adaptor (Art.No.: 55199) is available
as an option.
12 ENGLISH