Hd Radio™ Tuner; Other Settings - Kenwood KDC-X798 Manual De Instrucciones

HD Radio™ tuner
You can tune in to both conventional and HD Radio broadcasts.
• To find HD Radio stations in your area, visit
<http://www.hdradio.com>.
Search for a station or channel
Press B SRC to select HD RADIO.
1
Press J BAND repeatedly (or press
2
to select FM1/ FM2/ FM3/ AM.
Press S / T (or press S / T (+) on RC-406) to search for
3
a station or channel.
• To change the searching method for S / T: Press K SEEK
repeatedly.
AUTO1: Automatically search for a station or channel.
AUTO2: Search for a preset station or channel.
MANUAL: Manually search for a station or channel.
• To store a station or channel: Press and hold one of the number
buttons (1 to 6).
• To select a stored station or channel: Press one of the number
buttons (1 to 6) (or press one of the number buttons (1 to 6) on
RC-406).
Select an HD Radio multicast channel
Many HD Radio stations offer more than one channel programming.
This service is called multicasting. While receiving HD Radio
multicast channels....
Press S / T to select your desired channel (HD1 to HD8).
"LINKING" appears while linking to a multicast channel.
AM– / #FM+ on RC-406)
*
Direct Access Tuning (using RC-406)
1 Press DIRECT to enter Direct Access Tuning.
2 Press the number buttons to enter a frequency or channel.
3 Press ENT IW to search for a station or channel.
• To cancel, press or DIRECT.
• If no operation is done for 10 seconds after step
automatically canceled.

Other settings

1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to make a selection (see the following table), then
press the knob.
3 Press and hold to exit.
To return to the previous setting item or hierarchy, press
TUNER SETTING
IF BAND AUTO: Increases the tuner selectivity to reduce interference noises from adjacent
FM stations. (Stereo effect may be lost.) ; WIDE: Subjects to interference noises
from adjacent FM stations, but sound quality will not be degraded and the stereo
effect will remain.
AUTO YES: Automatically starts memorizing 6 stations with good reception. ; NO: Cancels.
MEMORY (Selectable only if [NORMAL] is selected for [PRESET TYPE].) ( 4)
RECEIVE Sets the receive mode of the HD Radio receiver.
MODE AUTO : Automatically tunes to analog broadcast when there is no digital
broadcast. ; DIGITAL: Tunes in to digital broadcast only. ; ANALOG: Tunes in to
analog broadcast only.
TAG MEMORY Displays the shared tag memory usage of the HD Radio tags and SiriusXM Radio
tags.
00 — 50: Up to 50 tags can be registered to this unit.
CLOCK
TIME SYNC ON: Synchronizes the unit's time to the Radio Broadcast Data System station time. ;
OFF: Cancels.
2
, Direct Access Tuning is
.
Default: XX
ENGLISH | 7