KITCHEN CREW 943353 Manual De Instrucciones página 17

Ocultar thumbs Ver también para 943353:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 79
Troubleshooting
If the appliance is not working properly, please follow these steps:
1.
Check that you have followed the operating instructions precisely and
correctly.
2. Check whether the table below offers a feasible solution.
3. Check that all fuses are intact.
Error
code
After plugging in the mains
plug and using the on/off
button to turn the appliance
on, the display and symbols
are not lighting up.
The flow of heat stops during
cooking.
There is no cookware on the
hob or the cookware is not
E0
suitable for use with the
induction hob.
Problem
Solution
Make sure that the buttons, cable
connection, power supply and fuse
are not damaged and that the po-
wer cord is properly plugged into
the wall outlet.
The appliance's overheat protecti-
on may have been activated. Dis-
connect the hob from the power
supply, then reconnect the power
supply and restart the appliance.
The appliance must not be cont-
inuously operated for more than
2 hours. The vent ilation openings
must not be blocked or dirty. Make
sure that the ambient temp erature
is not too high.
Place suitable cookware on the
hob.
17

Publicidad

Tabla de contenido
loading

Productos relacionados para KITCHEN CREW 943353

Tabla de contenido