Seat (All Models); Back (Provence) - Vermeiren PROVENCE Manual De Instrucciones

GB

SEAT (all models)

The seat is attached to the basic frame with clamping fixtures.
Place the seat (1) slightly diagonally with the curved fixture (2) in such a way that this fixture
A
grabs under the back crossbar of the basic frame (3).
Press the seat (1) down at the front so that the clamp (4) engages on the front crossbar of the
B
basic frame (5).
If you would like to remove the seat, proceed in the opposite order.
L
Make sure that no objects or body parts come between the seat and the frame – risk of injury!

BACK (Provence)

The back is secured with a connecting pole that can be removed to transport the chair.
1
A
2
3 5
2
1
4
B 1 = seat
2 = curved fixture
3 = back crossbar
4 = clamp
5 = front crossbar
Loosen the connecting pole at the screws (1)
and/or (2) and the back can then be folded
back for transport.
To reconstruct, tighten the screws (1) and/or
(2) securely by hand.
L
Make sure that the screws are
securely tightened before use.
5
FAUTEUIL REPOS