Attaching Strap - Maruyama M27QC Manual Del Propietário

Detaching
1 First, loosen the clamping knob before detaching
the shaft assembly to the shaft coupler.
2 Pull out the shaft assembly from the shaft coupler
while holding the positioning lever down.
3 Note : Do not over loosen the clamping knob or it
may fall out.
Positioning Lever
Clamping Knob
Loosen
Push down
Shaft Assembly
Removal
— US-14 —

Attaching Strap

WARNING
POTENTIAL HAZARD
• Without the strap installed on the
Brushcutter, the blade can produce side
thrust which can expose the operator
and bystanders to blade contact.
WHAT CAN HAPPEN
• Contact with the Brushcutter blade can
cause personal injury.
HOW TO AVOID THE HAZARD
• Never operate the Brushcutter without
installing and using the strap.
Snap the strap hook into the ring on the drive shaft. To
detach the strap quickly from the Brushcutter, pull
upward on the red band.
Red Band
Pull
Hook
Ring
Strap