Dremel 6700 Instrucciones De Funcionamiento Y Seguridad página 10

DM 1619PA7491_06-14_6700 6/26/14 11:46 AM Page 10
Disconnect the plug from the power source before making any assembly,
W RNING
adjustments or changing accessories. Such preventive safety measures
reduce the risk of starting the tool.
TURNING THE TOOl ON AND Off
The motor unit is switched "ON" by a toggle
switch located on the top of the tool.
To turn the motor unit "ON", with guide
installed, toggle the switch to the left.
To turn the motor unit "OFF", toggle the switch
to the right.
OpERATING SpEED
Your tool has a single operating speed of
4,800/min.
CHANGING ACCESSORIES
The diamond wheel included with your product
is designed for long life. If you need a
replacement wheel you should contact your
local Dremel Service Center.
Sharpening wheel is not
W RNING
user replaceable. Do not
attempt to replace it yourself. Send tool to
authorized service center for repair when
the sharpening wheel has reached end of
life. Replacing the sharpening wheel yourself
may damage the insulating flange and cause
an electric shock.
Operating Instructions
FIG. 4
10
On/Off
Switch
ON OFF