Product Features - Ryobi RY18LMX40A-0 Traducción De Las Instrucciones Originales

página de 245

/ 245
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

not all four wheels are on the ground

●

the grass discharge chute is exposed

●

and is not protected by the grass catcher

and grass discharge chute cover

hands and feet of all persons are not

●

clear of the cutting enclosure

Never operate the product if the on/off

■

switch on the handlebar does not properly

start and stop the product.

Never attempt to lock the on/off switches in

■

the on position; this is extremely dangerous.

Do not force the product. It will do the job

■

better and safer at the speed for which it

was designed.

Stop the blade when crossing gravel

■

surfaces.

Do not pull the product backwards unless

■

absolutely necessary. If you must back the

product away from a wall or obstruction,

first look down and behind to avoid tripping

or pulling the product over your feet.

Turn off the motor and allow the blade

■

to stop if the product has to be tilted for

transportation when crossing surfaces

other than grass, and when transporting

the product to and from the work area.

Never use the product with defective guards

■

or shields, or without safety devices, such

as deflectors or grass collectors, in place.

Do not tilt the pro

■

duct when turning on the motor or while the

■

motor is running. If absolutely necessary,

you may raise the front of the lawnmower

by no more than 5 cm to enable easier

starting. Press down on the handlebar to

achieve this. Always return the lawnmower

to its normal position with all wheels

on the ground before cutting. Tilting

the lawnmower exposes the blade and

increases the probability of objects being

thrown and accidental contact with the

blade.

Turn on the motor carefully according to

■

instructions and keep hands and feet away

from blades. Do not put hands or feet near

or under rotating parts.

Never pick up or carry the product while it

■

is running.

Turn off the product, and remove the

■

isolator key and the battery pack. Make

sure that all moving parts have come to a

complete stop:

whenever

leaving

●

unattended (including disposal of grass

clippings)

before clearing blockages or unclogging

●

discharge chute

before checking, cleaning, or working on

●

the product

before removing the grass catcher or

●

opening the grass discharge chute cover

after striking a foreign object; inspect the

●

product for damage and make repairs

as necessary before restarting and

operating the product

If the product starts to vibrate abnormally

●

(check immediately)

–

inspect for damage, particularly the

blades

–

replace or repair any damaged parts

–

check for and tighten any loose parts

Avoid holes, ruts, bumps, rocks, property

■

stakes, or other hidden objects. Uneven

terrain could cause a slip-and-fall accident.

Always ensure that the motor control cable

■

is never trapped, pinched or otherwise

damaged during assembly or when folding

the handle.

ADDITIONAL BATTERY SAFETY

WARNINGS

WARNING

To reduce the risk of fire, personal injury,

and product damage due to a short circuit,

never immerse your tool, battery pack or

charger in fluid or allow a fluid to flow inside

them. Corrosive or conductive fluids, such

as seawater, certain industrial chemicals,

and bleach or bleach-containing products,

etc., can cause a short circuit.