Technical Specifications - TIGEX Simplici’T Instrucciones De Uso

visual indicators for "your baby's sound intensity":
The parent unit has five LEDs which display the sound intensity of any noises
made by your baby. The louder the noise, the more lights will be illuminated
on the parent unit. In this way, you will know when your baby is crying, even if
the sound on the parent unit is switched off.
visual and sound indicators for "connection between both units":
When the connection between the parent and baby units is broken, a red connection light will start
to blink and a continuous beep will sound. This may occur when the parent unit is out of range of the
baby unit or if the baby unit is switched off. Once the connection has been restored, the light will stop
blinking and the beeps will stop.
Sound indicator for "battery level"
The battery life for the parent unit is between 10 and 12 hours (depending on how often you use the
baby alarm). If the batteries are running low, the parent unit will emit several warning beeps around
30 minutes before it switches itself off. Insert new batteries, or if using rechargeable batteries, charge
them using an external charger.
Changing channel:
The signal passed between the parent and baby unit is encrypted. Only the parent unit connected to
the baby unit in the factory can listen to the sounds broadcast. Sometimes, other wireless devices can
interfere with your baby alarm if they broadcast on the sale channel (the same frequency). If this is the
case, change the channel by pressing the button

5 TECHNICAL SPECIFICATIONS

This device works using a 2.4GHz frequency. The use of this baby alarm is authorized in all European
countries. In France, Italy, Russia and Ukraine, the baby alarm is only permitted for indoor use.
The specifications are identical for the emitter and the receiver.
Current power supply
Working temperature:
Frequency (2.4GHz):
The range of the baby alarm's signal is up to 300 metres in an open space and 50 metres in a house.
6. OTHER
General points:
• The baby alarm is only there to assist you, and must never replace an adult or a baby-sitter.
• You must only use the baby alarm to detect sounds coming from inside your private residence; all
persons within range of being heard by the baby alarm must be informed.
• You do not need a license in order to use the baby alarm. You can use the device in your own home,
and according to your needs. However, we cannot guarantee that the signal will always be free from
interference.
• When you are not using the baby alarm, we recommend switching off each unit.
Important information relating to the batteries
- The single-use or rechargeable batteries must be inserted so that the positive and negative terminals
on the baby unit. See Part 5: Technical Specifications
Input: AC110-240V
Output: 5VDC 2W 550mA
0°C to 40°C (32°F to 104°F)
CH1: 2413MHz CH7: 2443MHz
CH2: 2418MHz CH8: 2448MHz
CH3: 2423MHz CH9: 2453MHz
CH4: 2428MHz CH10: 2458MHz
CH5: 2433MHz CH11: 2463MHz
CH6: 2438MHz CH12: 2468MHz
18
Visual
indicators