Appliance Diagram - CASO DESIGN TouchVAC Manual Del Usuario

15.2 Appliance diagram

6 Canister: To start vacuuming for canisters, wine stoppers or other accessories through
a hose.
7 Sealing bar:
seal but not to stick to the strip. Place the bag over this sealing element.
► Do not remove the Teflon tape.
Warning
The sealing bar gets very hot.
Please observe the following safety notice in order not to burn yourself or others.
► To avoid getting burned, never touch the sealing bar directly after sealing process.
10. Lower gasket + 8. Upper gasket (do not remove it)
9. Air intake: Air intake connects with vacuum chamber and pump. Do not cover this air
intake when placing bag for Vacuum&Seal operations.
- To insert the hose for vacuuming canister or wine stopper.
11 Sealing profile: Presses the bag tightly onto the sealing bar (7).
12 Vacuum chamber: Position the open end of the bag inside the chamber.
Contains a heating wire covered with teflon which allows the bag to
Please note
36