Timer 1 - Teac SR-L280i Manual Del Usuario

ALARM 1, ALARM 2
The unit can be programmed to turn on at a specified
time. The unit will turn off 60 minutes after the specified
turn on time.
The unit can be set two different timer setting
separately.
Adjust the clock before setting the timer (see page 15).
Setting the timer (ALARM 1)
1
Press and hold the ALARM 1 button for more than
2 seconds.
The hour value and the Timer indicator (
the display.
If no button is pressed for about 10 seconds, the timer
setting mode will be cancelled.
2
Press the TIME button (
hour, and then press the ALARM 1 button.
The minute value blinks.
32

Timer 1

/
) blinks on
or ) to set the
3
Press the TIME button (
minute, and then press the ALARM 1 button.
Now the on time is set.
The source blinks.
4
Select a source (CD, TUNER, USB, iPod or BUZZER)
using the TIME button (
press the ALARM 1 button.
The volume value blinks.
5
Set the volume using the TIME button (
), and then press the ALARM 1 button.
The volume for timer operation is adjustable from 5 to
max.
Setting the timer is now completed.
You can set the ALARM 2 timer by following the
similar procedure as mentioned above.
or ) to set the
or ), and then
or