Technical Characteristics; General; Function Generator - Metrix mtx 3240 Manual De Instrucciones

Technical characteristics, Supply

Technical characteristics

General

Function
generator
Signal forms
Signal
frequency
MAIN OUT
signal output
Sinusoidal signal

Function generator

Only the values assigned announced tolerances or limits make up
guaranteed values. The values with no tolerance are given for information
(standard NFC 42670) and the measurement errors must be considered in
the reference climatic conditions.
The specifications are verified with shielded 50 Ohm BNC cables.
Periodic verification of this measuring instrument is necessary.
• Sinusoidal, triangular, rectangular, positive pulses (TTL level), Direct (DC :
offset) and adjustable logic output from -10 V to +10 V
• Display on LCD of one of the following symbols:
• DC 0.1 Hz to 5.1 MHz in 7 linear overlapping ranges (2 % app.)
• Accuracy of the displayed frequency : ± 0,05 % + 1 digit
• Frequency display on LCD : 4 digits (units : Hz, kHz, MHz)
• Adjustment: continuous by the encoder, automatic range switching
• Range adjustment using the "RANGE + " and "RANGE – " keys
• Temperature coefficient:
• Long term deviation (10 h) :
• Duty cycle: 50 % (by default), adjustable from 20 to 80 % on one
frequency range from 0.1 Hz to 5.1 MHz at ± 3 %
• Display of the duty cycle (VAR DUTY) at all times
• Display of the DC voltage (OFFSET) superimposed on the output signal
(default : 0 V).
• Amplitude adjustable in open circuit from 0 to 20 V
from 0,1 to 20 V
• Impedance : 50 Ω ± 3 Ω
• DC offset voltage : adjustable from -10 V to +10 V in open circuit
(OFFSET) at ± 5 %
• Protection against input overload voltage : 60 V
• Distortion : for f < 50 kHz, < 0.5 %
for f > 50 kHz, harmonics < -30 dB
• Measurement conditions :
unit operating for at least 1 hour
-
- maximum amplitude level
without 50 Ω load
-
< 0.2 % / °C
< 0,1 %
< 5 % from 100 mHz to 1 MHz
DC
< 10 % from 1 MHz to 5.1 MHz
:
DC
, 40 V
DC AC
45