EHEIM proxima 175 Manual De Instrucciones página 14

English
5. Assembly
Location
‧ Avoid direct sunlight and not too much daylight!
‧ Keep the aquarium away from heat sources.
‧ Keep the aquarium away from electrical equipment.
‧ Be aware of any nearby mains connections.
CAUTION! Material damage.
▶ Ensure that the surface is level and stable.
▶ Be mindful of the floor load provided by the entire weight.
Setting up and aligning the base cabinet (⌦A)
1. Place the base cabinet in the desired position.
2. Align the base cabinet horizontally using a spirit level.
A stand can be used underneath for horizontal alignment. Ensure that the stand fully supports the
surface.
Setting up the aquarium (⌦B)
DANGER! Personal injury or material damage.
The aquarium must not be transported or carried when it is filled.
CAUTION! Material damage.
No foreign bodies, mats or bases must be placed between the aquarium and base cabinet.
▶ Thoroughly clean the top side of the base cabinet and the lower side of the aquarium base.
▶ Remove any foreign bodies, mats or bases.
1. Place the empty aquarium on the base cabinet.
Adjusting/removing the doors
‧ The doors can be readjusted (see assembly instructions for furniture).
‧ The doors can be quickly removed/attached via the quick-release function.
6. Commissioning
Installing the drain/inflow
Please observe the operating manual of your filter.
Installing the aquarium lighting (⌦C)
1. The continuously adjustable LED brackets allow you to adjust the LED light c to the width of your
aquarium.
2. Place the LED light in the cover frame b on the front sides of the aquarium. Make sure that the LED
light is secure
3. Insert the LED light's power cable into the profile.
14