koban TRUE RMS 1000A AC Pinza Manual Operativo página 144

KPAW-01
TRUE RMS 1000A AC WATT Clamp Meter
measure higher than AC voltage 750 v and AC current
1000A.
To measure active power + phase angle, connect the
Meter as follows:
1. Diar the Rotary to KW to select Active power + Phase
angle range.
2. Press the lever to open the transformer jaw, and clamp
them to the corrresponding phase of tested conductor. If
user needs to mesaure any phase of the 3 phase, then
clamp them to that phase's conductor.
3. Connecting method (see figure 6, 7, 8):
4. Insert red test leads to L1, L2, L3 input terminal and
connecting it to every live wire of the 3 phase.
5. Insert black test leads to COM input terminal and connect
it to the neutrual wire of the 3 phase.
When measuring 3 phase 4 wires, connecting the Meter
as figure 6.
www.grupotemper.com 19