Getting Started; Installation For Windows; Device Driver Installation - J5create JUH450 Manual Del Usuario

GETTING STARTED

Notes Before Installation
Install the driver completely before inserting the USB cable into your computer

Run the setup program as an administrator to avoid errors in installation

Connect the HDMI Cable for the display to the HDMI port on the JUH450 first before

connecting the USB cable to the computer
Un-install the previous driver first before installing the latest driver

1. Start the device driver installation (please refer to your PC system OS installation in the next
section) *Note: install driver completely before following steps 2 through 4.
2. Connect the USB 3.0 cable connector to the host laptop
3. Connect the HDMI cable for the display device
4. Your USB HUB port is now ready to use

INSTALLATION FOR WINDOWS

Device Driver Installation

This section illustrates the simple device driver installation guide for Windows 7 operating system.
When your computer is ready to use, insert the Driver CD into the CD-ROM drive. The setup
program should be launched automatically; if it doesn't, go to Computer, click on your CD
6